langi SDI wireless HD Wireless Video Transmission System Wireless image transmission 1000ft HDMI Image Wireless Transmitter

HDMI SDI wireless 1000ft Transmission for Camera Image Wireless swift 1000 Transmitter Receiver Image Wireless Video HD Transmitter

Main features of Wireless Video Transmission System:
1: The maximum transmission distance is 1000FT.
2: 10 wireless channels are available for free selection.
3: No delay, no compression.
4: Support one-to-many transmission mode, multiple RX can receive TX video signal at the same time.
5: Standard video interface can be obtained without purchasing other lines.
6: Wide voltage input (9-18VDC).
7: Simple operation and easy to carry.

Wireless Video Transmission System detailed description:

TX resolution: 1080p60/50/30/25/24/23.98/29.97/59.94/24PSF/25PSF
1080i 60/50
RX resolution: 720p60/50/59.94/480i60(NTSC)/576i50(PAL)
Delay: no delay
Audio: SDI/HDMI built-in 24 bit/48KHz PCM
Operating frequency: 4.9-5.9GHz suitable for Asia, the United States, Europe, etc.
RF power: 17dBm
Transmission distance: Up to1000FT
Bandwidth: 40MHz
Anti-interference: can coexist with WIFI 5G mobile phones, etc.
TX input voltage: 9-18V DC
RX input voltage: 9-18V DC
TX power: <7 watts
RX power: <9.5 watts
TX screen: 0.96 inch OLED
RX screen: 0.96 inch LCD
Working temperature: -10~50°C
TX pairing mode: one to many
RX pairing mode: one to one
TX size: (Length x Width x Height): 72×120×20mm: (Length x Width x Height):
RX size: 174×100×22mm
TX weight (including antenna): 300G
RX weight (including antenna): 500G
Upgrade: Upgrade the firmware through the Mini USB interface
Installation: RX comes standard with V-mount battery gusset.
TX comes standard with F970 battery gusset.
“1/4” PTZ screw hole.

Image Wireless HD Video Transmission Packing accessories list:

Transmitter TX: 1
Receiver RX: 1
5G antenna:3
Power cord: 2
SDI connection line: 2
Universal Monster Hand: 1
PTZ adapter screw: 1
Product standard list: 1
Aviation suitcase: 1
Outer packing carton: 1

Wireless image transmission channel settings

A total of 10 channels, 0-9 (the transmitter and receiver channels must be the same).
10 sets can be used in the same environment at the same time. If there are many full-frequency wifi on site, up to 6 sets can be used.
In general, the signal channels of 234569 are better, and the frequency used by 5.8g Wifi is similar to our 0178.

1. TX channel setting method
Step1: Press the power switch to start TX.
Step2: Long press the “MENU” button on the transmitter until the display is unlocked and released.
Step3: Click the “+” or “-” button to select the channel, and then click the “MENU” button to confirm
recognize.
Step4: The channel of the transmitter is set successfully.

2. RX channel setting method
Step1: Start the receiving end.
Step2: Long press the “MENU” button on the receiving end until the display is unlocked and released.
Step3: Use the “<>” button to select the channel, and then click the “MENU” button to confirm.
Step4: The receiver channel is set successfully.