The SARAMONIC SR-AX107 is a 2-channel XLR audio adapter with preamplifiers and phantom power, ideal for any DSLR cameras with a built-in microphone jack. Wide-variety of audio devices like professional condenser microphones, wireless microphones, external audio mixers, sound boards and more can be connected to the camera via this adapter.
The SR-AX107 makes your recording work much easier. Level Meter allows you to verify the proper input levels in real time, the output signal can be adjusted by the level controls for optimum recording. The phone jack lets you monitor the audio from the adapter during recording, or camera during playback. The AGC disable feature reduces noise during quiet moments of recording by stop using the cameras' Auto Gain Control function.
The Saramonic SR-AX107 features an Isolation Transformer which provides a completely noise free and pure sound. It provides the function of gaining 20dB boost of your recording.
Isolation Transformer Provides a completely noise free and pure sound
Level Controls Balance both input levels through the adapter.
Gain Switches selects LOW for unity gain or HIGH for a +20dB boost in sound level.
Peak Switches turns on / off the LED signal indicators which flash red for overload.
AGC ON/OFF Switch reduces noise during quiet moments of recording by cutting our your camera's Auto Gain Control function.
M/S Switch selects mono or stereo output modes.
GND1/GND2 dual-mode grounding switch.
PH 12V/OFF/48V Switch Selects 0, 12 or 48 volt phantom power.
Dual Headphone Jacks feature isolated volume controls and allow you monitor the audio from the adapter at the input and output points.
Power Requirements One 9 volt battery (not included )
Dimensions 6″x 3.75″x 1.75″ (152 mm x 95 mm x 44 mm)
Weight 18 oz (0.51 kg)
Inputs: Two balanced XLR inputs & One Monitor input jacks
Output: One stereo 1/8″ (3.5 mm) Mini-Jack output
Left and Right Control Knobs adjust the signal of each channel to the optimum recording levels
Volume Control knob adjusts the headphone volume level
Mono /Stereo Switchp: Select mono or stereo output mode
LINE / MIC/ PH Switches: Select LINE or MIC or Phantom levels
12V/48V Switch: Optional 12 or 48 volt phantom power for condenser microphones that require phantom power to operate.
Level Meter: Indicates the sound level in dB for each channel
LED indicators: The LED signal indicators flash red for overload
Gain Switch: Selects LO for unity gain or HI for +20dB boost
MONITOR: Headphone jack to monitor the audio from microphones or camera
AGC DSBL: Camera Auto Gain Control will increase the gain to maximum level, the AGC Disable function reduces the hiss when the camera is recording during quiet moments.